HF LF Modem RM8 2G ALE
Offering a wide range of standards-based waveforms and protocols, the RM8 software defined modem with 2nd Generation (2G) Automatic Link Establishment (ALE) provides interoperable data modem and link setup in a standalone unit for strategic and maritime data communications. The 2G ALE Controller is a software option for the RM8, and can be combined with LF and HF modem software packages, selected by an activation key.
Features
- HF modem operation
- MIL-STD and STANAG compliance
- Automatic radio control and channel selection
- Built-in GPS with time updates
- Menu-driven configuration and control
- Individual, Group & Net Calls
- All, Any, Wildcard Call
- AMD, DTM, UUF
- LQA Sounding & Polling
- Emergency Operator break-in
- Automatic Hand-Off to Modem
- Security Level (AL-1, AL-2)
- Time Exchange
- Serial and Ethernet control and data input
- AC and DC power
- Operates with RC66
Options
- 3G ALE
- 3G packet data
- VHF/UHF modem
Better Connectivity, Security with 2G ALE Networking
The RM 8 2G ALE Controller provides better connectivity over a greater number of frequencies and allows linking to other HF stations in a network without operator intervention. To overcome variable HF propagation conditions, a number of frequencies are available.
Performing all the basic protocol functions for individual calling, one-to-many calling, sounding and scanning up to 5 channels per second, the 2G ALE Controller provides advanced features with greater reliability than using a single frequency.
The 2G ALE Controller continually scans the pre-selected set of channels, listening for calls, and improves linking quality analysis by continuously listening to sounds and calls from other stations, when not otherwise committed.
HF network operators can rely on the RM8 2G ALE Controller to provide additional security via MIL-STD-188-141B, App. B Linking Protection protocol, utilizing a built-in GPS.
CHARACTERISTIC | DESCRIPTION |
ALE Waveforms |
|
ALE Protocol |
|
Linking Protection |
|
Occupancy Detection |
|
REMOTE Control |
|
RADIO Control Protocol |
|
Configuration For Non-Volatile RAM |
|
INTERFACES | |
DTE (Data) Port (DB25F) | RS-422 balanced, RS-423, RS-232 unbalanced., MIL-STD-188-114 (interoperable), EIA 530A compliant Half & Full Duplex operation, Synchronous, Standard and High-speed Async modes |
Remote Control / GPS Port (DE9M) | Remote Control Pins: RS-485 Multi-drop, RS-422 balanced or RS-232 Protocol: Control Protocol (RAP1 + RIPC, ASCII S5066 Annex E) |
External GPS Control Pins: RS-232 (nominally input) Data Rate: 300 to 19200 bps, 1/2 stop bits, 7/8 bit data. PPS line: RS 232/422 (NMEA) or TTL | |
GPS Antenna (MCX) | Built-in GPS receiver: Time reference for 2G ALE Linking protection (AL-2). |
Ethernet CTRL Port (RJ45) | Remote Control: 10/100 Base T (IEEE 802.3U compatible), embedded TCP/IP Stack Protocol: Control Protocol (RAP1 + RIPC) |
Ethernet Data Port (RJ45) | IP Packet Data: 10/100 Base T (IEEE 802.3U compatible), embedded TCP/IP Stack Protocol: Raw IP packet data, requires 3G ALE |
Local Control | Local control via 32x202 pixel graphical LCD display and 16-key keypad. 3 bi-colour LED indicators Alphanumeric and digit keypad for fast data entry, 4-way navigation button |
Radio Control & Audio Ports (DB25M) | Radio Control Pins (2 channels): RS-232, up to 115200 bps, 1/2 stop bits, 7/8 bit data Supports for various radio control protocols are built-in |
Input Audio (2 channels): 600 Ohm balanced, –20 to +10 dBm without adjustment Output Audio (2 channels): Balanced, –40 to +10 dBm adjustable into 600 ohm load Keyline: Non-polarized contact closure (<45 V, 200 mA). PTT Sense Input: Pull to ground to indicate external PTT. | |
Aux Audio Pins: Connection of microphone for ALE voice calling Input Audio: 600 ohm balanced, –20 to +10 dBm without adjustment or MIC input (selectable) Output Audio: Balanced, –40 to +10 dBm adjustable into 600 ohm load |