AT RF13D Duplex VHF Transceiver

 PDF version Download PDF version of text | Printer-friendly versionPrinter-friendly version

AT RF13D Duplex VHF Transceiver



AT RF13D Duplex VHF Transceiver AT RF13D is a VHF transceiver designed for duplex data operation. AT RF13D design is based on AT RF13 transceiver, the difference being in an added independent input for receiving antenna, modified AF paths and modified control program. It is used in a set with ZM13.1 (ZV13.1) power amplifier, AF13, AF13.1 co-site filters. The transceiver can be operated independently with RF13 transceiver accessories.


Operating features

  • whisper operation with increased microphone sensitivity
  • squelch - inhabitable, normal or tone (150 Hz)
  • 9 preset channels storage
  • pre-set channels priority scanning
  • selective calling
  • FLASH - 3 digits code quick transmission
  • i n case of emergency, instant erasure of data stored in memory
  • selection of access and operation level
  • channel programming from PK13 fill gun, or from another transceiver
  • controlling of transceiver from handset
  • pre-set channels selection
  • group and general call
  • group and individual users selection
  • encrypted speech with individual codes of channels
  • telephone line extension

Technical parameters

Frequency range 30.000 MHz to 87.975 MHz
Channel spacing 25 kHz
Number of channels 2320
Channel selection digital, from transceiver keyboard
Operating modes simplex or semiduplex telephony or data transmission to 16 kbit/s
Voice encryption through internal digital scrambler
Modulation FM, max. deviation 5.6 kHz
RF power output 0.2 W reduced (± 2 dB)
  5 W nominal (+1.5 dB/-1 dB)
Receiver sensitivity better than 0.5 μV at 12 dB SINAD
Effectively transmitted frequencies range  
for F3 operation 300 Hz to 3400 Hz
for data transmission 150 Hz to 9000 Hz
AF power output    controllable, min. 200 mW/4 Ω
Nominal power supply voltage 12 V from the rechargeable battery pack with NiCd storage batteries with 4 Ah capacity
Power supply voltage range 10 V to 15 V
Operation time minimum 14 hours at 1 : 1 : 10 Tx/Rx/Standby ratio and nominal output power
Current consumption max. 2 A in transmission mode at nominal output power
  max. 0.6 A in transmission mode at reduced output power
  max. 0.2 A in reception mode
  max. 0.12 A in standby mode
Operating temperature -30 °C to +60 °C
Transceiver weight max. 2.7 kg (no battery pack or accessories)
Battery pack weight max. 2.5 kg
Dimensions of transceiver with battery pack W 205 mm x H 83 mm x D 252 mm
Weight of complete set in bag, including a spare battery pack max. 11.5 kg
Dimensions of complete set in bag 250 mm x 380 mm x 450 mm
Range average range at nominal output power in medium-wooded and medium-undulated terrain:  
- with 0.5 m short tape antenna 1 km
- with 1.5 m long tape antenna 8 km
- with hang-up antenna 15 km
- with 30 m long-wire antenna 25 km

 

 


AT RF13D Duplex VHF Transceiver