AT RF1325 25 Watt VHF Mobile Package
This mobile package with maximal output power of 25 W can be installed in all wheeled and tracked vehicles. The AT RF13 transceiver and ATZM13.1 amplifier are located on top of each other in a springcushion frame. If the mobile set is designed for installation in wheel vehicles without artillery or mortar weaponry, or for fixed posts, you may use the lighter, non-cushioned frame 7007.100.01 instead of springcushion frame 7007.100.10. The set can be controlled from one location. |
Technical parameters
Frequency range | 30.000 MHz to 87.975 MHz |
Input impedance | 50 Ω |
Output impedance | 50 Ω |
Channel spacing | 25 kHz |
Number of channels | 2320 |
Channel selection | from transceiver keyboard or handset |
Operating modes | simplex or semiduplex telephony or data transmission 16 kbit/s |
Voice encryption | through internal digital scrambler |
RF power output | 0.2 W reduced, 5 W nominal, 25 W amplified |
Receiver sensitivity | better than 0.5 μV at 12 dB SINAD |
Modulation | FM, max. deviation 5.6 kHz |
Effectively transmitted frequencies range | |
for F3 operation | 300 Hz to 3400 Hz |
for data | 150 Hz to 9000 Hz |
Interface for connection of PC | RS232C |
Data transmission rate in radio channel | max. 16 kbit/s |
Modulation for data transmission | GMSK |
Modulation signal level for 4 kHz frequency deviation | for F3 operation 100 mV |
for data 430 mV ± 50 mV | |
AF amplifier output power | 1 W in loudspeaker with impedance 6 Ω |
AF frequency range | 300 Hz to 3000 Hz in 6 dB range |
Nominal power supply voltage | 12 or 27 V |
Power supply voltage range | 10V to 33 V |
Current consumption at | |
reception | 0.8 A/12 V; 0.5 A/24 V |
transmission 5 W | 2.6 A/12 V; 1.3 A/24 V |
transmission 25 W | 10 A/12 V; 5 A/24 V |
Continuous operation time in +50 °C, 25 W | min. 2 hours |
Operating temperature range | -30 °C to +60 °C |
Dimensions including frame (7007.100.20) | W 428 mm x H 224 mm x D 165 mm |
Set weight including frame (7007.100.20) | max. 15 kg |
Note | Customer can order modems in ZM13.1 power amplifier in Net or P2P configuration |
Components
- Transceiver AT RF13
- Power amplifier 25 W (Net) AT ZM13.1
- Frame
- AF cable
- RF cable
- Grounding
- Grounding
- Connector nut
- CD for modem configuration ModEx