AT RF1350 50 Watt VHF Mobile Package
 | This mobile package with maximal output power of 50 W can be installed in all wheeled and tracked vehicles. The AT RF13 transceiver and AT ZV13.1 amplifier are located on top of each other in a spring cushion frame. If the mobile package is designed for installation in wheel vehicles without artillery or mortar weaponry, or for fixed posts, you may use the lighter, non-cushioned frame 7007.100.01 instead of spring cushion frame 7007.100.10. The package can be controlled from one location. |
Technical parameters
| Frequency range | 30.000 MHz to 87.975 MHz |
| Input impedance | 50 Ω |
| Output impedance | 50 Ω |
| Channel spacing | 25 kHz |
| Number of channels | 2320 |
| Channel selection | from transceiver keyboard or handset |
| Operating modes | simplex or semiduplex telephony or data transmission 16 kbit/s |
| Voice encryption | through internal digital scrambler |
| RF power output | 0.2 W reduced, 5 W nominal, 50 W amplified |
| Receiver sensitivity | better than 0.5 μV at 12 dB SINAD |
| Effectively transmitted frequencies range | |
| for F3 operation | 300 Hz to 3400 Hz |
| for data | 150 Hz to 9000 Hz |
| Interface for connection of PC | RS232C |
| Data transmission rate in radio channel | max. 16 kbit/s |
| Modulation for data transmission | GMSK |
| Modulation signal level for 4 kHz frequency deviation | for F3 operation 100 mV |
| for data 430 mV ± 50 mV | |
| AF amplifier output power | 1 W in loudspeaker with impedance 6 Ω |
| AF frequency range | 300 Hz to 3000 Hz in 6 dB range |
| Nominal power supply voltage | 27 V |
| Power supply voltage range | 18V to 33 V |
| Current consumption at | |
| reception | 0.5 A/27 V |
| transmission 5 W | 1.3 A/27 V |
| transmission 25 W | 8 A/27 V |
| Continuous operation time in +50 °C, 25 W | min. 30 minutes |
| Operating temperature range | -30 °C to +60 °C |
| Dimensions including frame (7007.100.20) | W 428 mm x H 224 mm x D 165 mm |
| Set weight including frame (7007.100.20) | max. 15 kg |
| Note | Customer can order modems in ZV13.1 power amplifier in Net or P2P configuration |
Components
- VHF Military Transceiver AT RF13
- Power amplifier 50 W (Net) AT ZV13.1
- Frame
- AF cable
- RF cable
- Data cable
- Grounding
- Grounding
- Connector nut
- CD for modem configuration ModEx